To Make a Baseball Field Diorama Out of a Shoebox, you have to draw clouds on the long side of a blue sheet of construction paper with using white and gray crayons. As you draw the clouds, you need to extend them across the length of the paper. After that, Spread glue on the back of the construction paper and position the paper so the edge meets with the long edge of the shoebox. You should Glue the paper in so it curves toward the bottom of the shoebox that creates a more natural-looking sky. Then, Draw half-circles that represent people in the top row of the baseball stadium stands on the black construction paper with the pencil.
Next, fit the black construction paper into the shoebox and measure how high you want the row of heads to go inside the diorama. When you are satisfied with the height of the row of heads, you can press a fold into the paper where you want to cut it. You must cut the black construction paper where you folded it and glue it into the shoebox. You have to let it to curve inward from one end of the shoebox to the other to make more realistic stadium seating. Forth, Measure the side of the shoebox from the open top to the bottom of the shoebox and lengthwise from one short side to the opposite side.
You need to Use these measurements to mark the dimensions you need for the stadium grass. You should draw guidelines on the green construction paper using the measurements you just took of the side of the shoebox. After that, cut the green construction paper using the guidelines. Using a white crayon, you must draw a baseball field from the pitcher’s perspective. You can Glue the green construction paper flat on the interior long side to make the baseball field.
Then, Smear glue on the bottoms of the baseball players using a cotton swab. You have to position them at home plate, the pitcher’s mound and each base on the baseball field.